How to Use Cricut Iron on

Cricut Iron-On would be Cricut’s brand of heat exchange vinyl or, in short, HTV. You will stick the vinyl on fabric, whether it is a t-shirt or a pillow, or even timber or iron, as the name says. Design your iron-on pattern in the Design Space, carve it out with your Cricut machine, and stick it to your material with a heat press, an iron, or the Cricut EasyPress, just like regular vinyl.

HTV is easily available for a reasonable price from various retailers, both online and in real life, but if you own a Cricut machine, Cricut Iron-on Vinyl is the way to go. Cricut Iron-on is precisely tested and refined for Cricut cutters, ensuring that it will still be the optimum match for your machine.

Unlike cheap HTV that can purchase elsewhere, Cricut Iron-On is consistently the same depth and excellent quality, ensuring optimum, most precise cuts. Today, we will walk you through all the information on using Cricut iron-on.

How to Use Cricut Iron on Materials

cricut iron press on tshirt

Cricut Iron-On has a range of variety in their products depending on materials. To use them on different materials, you can choose different Cricut Iron-On that best suits you. 

Cricut Glitter Iron On

Cricut Iron-On sparkling vinyl is perhaps their most selling HTV product. It is stunningly beautiful. Cricut Iron-On Glitter features in a combination of thirty-one colors, ranging from white glitter to aqua glitter, bronze glitter to multi-pink glitter. This is a place where you can go completely insane.

They come in twelve by nineteen-inch rolls and are compatible with all the Cricut cutters. On occasions, you will be eligible to purchase them in quantity on Amazon in twelve-inch by one-twenty-inch rolls.

Printable Iron On Cricut

The Printable Iron On from Circut is a lifesaver for all of us who prefer to utilize Create Then Cut since it enables you to copy your designs on paper and then have them cut from out of HTV. It is great for one-of-a-kind creations. This Printable Iron On is available in two colors: light and dark. These come in a four-sheet set that measures eight and a half by eleven inches.

Foil Iron On Cricut

Foil HTV is a famous specialty in the Cricut Iron-On game, so it is perfect if you are after a little shinier and distinctive but would not want to go all out with glitter.

A foil Iron of Cricut On vinyl comes in a variety of colors and may use with any Cricut machine. It is packaged on a twelve-inch-tall by the twenty-four-inch-wide roll.

Iron On Lite by Cricut

Iron-On Lite from Cricut is the most common Cricut HTV material, and you will use it for most of your craft cuttings. It comes in rolls that are twelve inches tall by nineteen inches broad and come in a whopping forty-one distinct colors.

If your Cricut Iron-On Sparkle is not quite up to your alley, the Holographic Glitter Iron-On is sure to please. It is accessible in five distinct hues and appears in twelve by twenty-four inches roll. It works with all Cricut machines.

Instructions for Cricut Iron On

design heat press on tshirt

Now that you have purchased a Cricut Iron-On, you are probably eager to put it to work.

Because it is pricier than conventional vinyl, artisans are often concerned that they will waste their investment if they make a mistake, so many put it off for a long time. Follow the steps outlined below.

Step 1: Create a design

As with any vinyl cutting project, your first step is to develop your design. Go to Design Space and either make your pattern there or use their picture store to find something acceptable.

Remember that if you use your photo as a design, you must first transfer the file to the Design Space. Make sure it is the right size and form after it has been posted.

Step 2: Reverse the Image

This is arguably the most critical step because it is the small element that many people overlook, resulting in material waste. At the top right of the screen, hit the green GO button. This will bring up a small previewing screen on the machine’s left, where you can choose the number of copies you need, the size material you are using, and, most crucially, a checkbox labeled “Mirror Image.”

Check the box that says “mirror image.” If you skip this step or fail to remember, your design will be backward when you iron this onto your cloth. After you have ticked everything, press the GO key once again.

Step 3: Pick Material

This step will open up a screen for choosing what material you plan on using. If you already have an Explore Air-2, choose between Light Cardstock and Vinyl  by turning the switch on the front of the right side of the device to ‘Iron On.’

Step 4: Load the Materials

Check to see that you have inserted your Cricut Iron-On through the cutter correctly at this time. You must put on the cutting surface with the vinyl facing up and the plastic backing down.

Attach the mat, secure it with the up-down directional arrow just on the left, and then start the process using the glowing Cricut button just in the center.

Step 5: Weeding

To remove the cutting mat after printing the design, push the directional arrow button once again. It is time for you to pluck your pattern aside from the additional fabric and the mat after pulling this out of the device.

Step 6: Defending

Next, flip your pattern over so that the plastic backside is facing up and position this in the same spot where you want to apply it to the fabric. Then apply the Iron-On Protection Coverslip of it, thoroughly covering it. This protects both the vinyl and fabric from iron heat and ensures that the energy is evenly dispersed throughout the design.

You may not have Cricut Protection Sheet. In that case, a thin sheet of cloth works fine as a substitute for a similar effect. Some individuals prefer to iron directly into the plastic backing. However, this exposes the design to uneven heat energy, and a possibility of sinning arises.

Step 7: Transferring 

Make sure that the steam feature is turned off when using the iron. Under the fabric, press it down on the pattern. Please keep it in that position for about ten seconds before shifting this to a fresh one. Take off the protective coating and carefully remove the plastic coating to see whether the vinyl is fully adhered to or not.

You can take the entire plastic covering off and let it cool if the plastic breaks off, leaving the vinyl glued to the fabric. If the vinyl is not staying adhered to, do not worry; all you need to do is, use the heat for a bit longer. Return the plastic covering and protection sheet to their original positions and iron once more.

The time it takes will vary depending on your iron’s heating power, along with the size of the pattern. Generally, it takes at least 5 – 10 minutes. However, do not be scared to check the plastic, again and again, to see whether it’s done or not.

Step 8: Allow cooling

Allowing the vinyl to cool down thoroughly before moving it will be the final step in ensuring that this has been simply adhered to. This will guarantee that the Iron-On of Cricut has adhered completely.

An Alternative:

Infusible ink is an alternative that you can think of. It is just a sublimated transferring system that produces professional results, unlike Cricut Iron-On, which uses a transferring heat system. 

Do You Need Cricut Easy Press?

In a nutshell, no. While using Cricut- Iron-On vinyl, a regular iron will suffice.

However, if you are using a lot of HTV, it’s a worthwhile investment. Compared to a regular press, the Easy Press burns to the perfect temperature and uniformly heats the design throughout. To check the plastic back, you won’t need quite so much experimentation. Once it has finished, it has finished – everything of it.

It is also considerably safer to get than a standard iron because there is less risk of burning yourself. The Cricut’s Easy Press is preferable to iron if you are a little sloppy or working with kids. It is also relatively affordable, making it a wonderful choice for makers who may not want to spend a lot of money on a typical heat press but still want something more complex and dependable than regular iron.

Do You Cut the Htv From One Side or the Other?

Heat transfer, iron-on the vinyl sheet, and the carrying sheet are the two layers that make up the vinyl. Once you get them, they are stuck together and almost indistinguishable. The VINYL side is what you want to cut. The vinyl side of many, if not all, iron-on vinyl is matte, whereas the carrier surface is glossy. That is why you have been recommended to cut it on your mat with the glossy side down. As a result, your mirrored artwork is carved into the vinyl directly, allowing you to discard any vinyl that is not needed for your project.

When Both Sides Are Glossy, Which Side Is Up?

Let us continue digging a little further. What do you do when both sides of a piece of paper seem to be the same hue and both the sides are shiny? Consider, for example, White Iron-On Cricut SportFlex Vinyl, which is glossy on both sides. There are two ways to tell the distinction between the two shining sides:

Even if just slightly, the container side is brighter than the iron-on vinyl side. Once your iron-on vinyl is applied on the roller carrier facing out means that the carrier side folds down as well as the vinyl half curls up.

Finally, if both shiny sides of the same color are shown to you, the marginally less shining side will be the vinyl surface.

FAQs:

Why Is Mirroring Important?

Because you are cutting it backward, you will need to mirror it. Besides the adhesive part of the cutting, the pad is the “transfer tape” for iron-on vinyl. Therefore, remember to check the “mirror image” option before cutting. It is a good thing it’s that simple! However, try to follow through! It is simple to remember with Cricut.

Why Is Not There Any Transfer Tape?

Cricut Iron-On Vinyl does not need transfer tape since the plastic carrier paper is already linked to the iron-on vinyl. It makes things a lot easier! This is also why you trim Cricut Iron-On Vinyl with the shiny side down that you are applying the gleaming transfer tape to the sticky mat’s surface.

What Is the Ideal Way to Keep Vinyl Safe?

Many people prefer using the IKEA bag organizers. You can store them in rollers in a set of Sterilite cabinets. It is certainly not as well-organized as you would want, but it serves the purpose and can be stored in the guest room.

What Kind of Images Can You Use to Create Vinyl Transfers in Cricut Design Space?

If you own a subscription to Cricut Access, you can utilize the products there; however, you can use other documents and upload them into the Cricut. I would suggest using a picture with distinct borders. You can use a picture with a white background or a transparent background in a PNG file. You could also use an SVG image or your design.

Conclusion

Cricut iron-on is something used worldwide. The range of possibilities it provides is mind-blowing and effective. While printing pictures on different materials, the Cricut iron-on is exactly what you need. This discussion above is fully dedicated to using Cricut iron-on and related inquiries.

After the step by step using direction, you should not face any problem using a Cricut iron-on anymore. If you are planning to buy one, go for it.

Hopefully, this article could provide you with the necessary information you were looking for.

Rate this post
About Tom

Tom is a blogger and artist who also loves technology. He spends his days blogging about the latest developments in the world of art, and he enjoys sharing his thoughts with readers on what it means to be an artist today. Tom has always been interested in technology - but it wasn't until he was 13 years old that he discovered how much fun making websites could be! Tom is a fun-loving, adventure seeking creative type. He enjoys reviewing art products and technology gadgets on his blog and has been doing so for over 5 years now! He spends most of his time in the studio, at the beach, or out exploring new places.

Leave a Comment